View OTS-1ERT-NOC-IC_4580675.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Optiva Standard, 1 Duplex 10/100 Mbps Ethernet
TM
OTS-1ETR
Ethernet Transmission The OTS-1ETR provides auto-sensing digital transmission of 1 Channel of 10/100 Ethernet.
Ethernet In
Ethernet Out
Video
System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19" rack-mountable card cage (OT-CC-16-100) or one of our smaller OptivaTM Desktop Card Racks (OT-DTCR Series). The OptivaTM Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See "Accessories" for power supply specifications. OptivaTM Upgrade Path
ST, LC, SC or FC
TM Optiv a TM Optiv a
Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See "OptivaTM Upgrade Path".
Audio
ST, LC, SC or FC
Data
VAD Transmission
VAD Transmission
OTS-1ETR
OTS-1ERT
Ethernet
Features * Uncompressed 10/100 Ethernet over one fiber * TDM - Single fiber, dual wavelength * Compatible with MDM-7000 Series for WDM and CWDM multiplexing * No EMI or RFI and no ground loops * Stand alone or rack-mount
This system can be purchased without an optical port as an add-on to an existing OptivaTM system daisy-chain. (See "Non-Optical Version" below). The OptivaTM bandwidth requirement of this system is 172 Mbps.
Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-1ETR-A2/A3M-XX-IC OTS-1ETR-A2/A3-XX-IC OTS-1ETR-A2/A3D-XX-IC OTS-1ETR-A2/A3H-XX-IC OTS-1ETR-L4/L4-XX-IC OTS-1ETR-NOC-IC Receive/Transmit** OTS-1ERT-A3M/A2-XX-IC OTS-1ERT-A3/A2-XX-IC OTS-1ERT-A3D/A2-XX-IC OTS-1ERT-A3H/A2-XX-IC OTS-1ERT-L4/L4-XX-IC OTS-1ERT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot)
* Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 * info@opticomm.com * www.opticomm.com * Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
Data (Ethernet/Serial/USB)
Data Standard Data Rate Connector
General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring
OptivaTM Configurable Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 Communication Platform Network Management SDI & HD-SDI 11 oz Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories
Insert Card (IC): 6.3" L x 0.8" W x 4.0" H -20 C to +55 C -40 C to +85 C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaViewTM SNMP Management Suite
MADE IN THE USA
Sample Configuration

▲Up To Search▲

Price & Availability of OTS-1ERT-NOC-IC

	To Download OTS-1ERT-NOC-IC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .